Contents [ hide ] 1 Example Configuration 2 Provider Configuration Pages 3 Gateway Overview 3.1 Keeping Connections Alive 4 See Also

Example Configuration

The following is a list of phone providers that have been successfully tested with the FreeSWITCH software.

Provider Configuration Pages

When adding a provider to this list within the wiki please observe these guidelines:

• include a generic configuration
• no marketing information
• keep them alphabetically listed

A through E	F through H	I through P	Q through Z
Asterlink AQL Bandwidth.com BBTel Belcentrale.nl Brastel Broadvoice Broadvox Budgetphone.nl Callcentric CallWithUs CheapNet.it ContactTel Cordia DID For Sale DUS.NET	Free World Dialup (FWD) FlowRoute F?nSWITCH FreePhonie FreeDigits Gafachi Gizmo Gradwell GrnVOIP Halonet	iCall Carrier Services iinet Inphonex IPKall IPNess iptel ippi iristel Junction Networks Les.net Localphone.com MixMeeting Metrostat MyDivert.Com MyNetFone Neotel Nextiva Netsip.com.au NodePhone Nomado Telecom OneSuite PennyTel Peopleline Phonzo	Rapidvox sipcall.ch SipGate.de SonoVoIP SureVoIP Teliax Telasip Unlimitel ViaTalk Vitelity VoiceMeUp Voice Network VoicePulse VoiceStick VoIP Innovations VoipCheap VoipStreet VoipTalk Voip.ms SwiftVox VoipUser Vonage Whistle Phone Yahoo Messenger

Note: If you are looking for an example with different destinations for the registration proxy and outbound proxy, see the example configuration for Peopleline.

Gateway Overview

As an example we will add a trunk to vitelity.com. PLEASE NOTE THAT THIS IS AN EXAMPLE. REPLACE WITH YOUR OWN CONFIGS FOR YOUR PROVIDER (see table below).

Vitelity.com uses different proxies for inbound and outbound calls, so we need to add two gateways (they can be in the same file). One for outbound and one for inbound. Many providers (Vitelity included) allow you to make outbound calls via the registration proxy for inbound calls and so you really only *need* to setup one gateway. Before we start that we'll need to know a couple different pieces of info:

• username
• password (also called secret)
• outbound server
• inbound server

    sudo vim /usr/local/freeswitch/conf/sip_profiles/external/vitelity.xml

  

    <include>
  <gateway name="vitelity-outbound">
    <param name="username" value="****yourusername"/>
    <param name="password" value="****yourpassword"/>
    <param name="realm" value="vitel-outbound"/>
    <param name="proxy" value="****outboundurl"/>
    <param name="register" value="false"/>
  </gateway>
  <gateway name="vitelity-inbound">
    <param name="username" value="****yourusername"/>
    <param name="password" value="****yourpassword"/>
    <param name="realm" value="vitel-inbound"/>
    <param name="extension" value="1000"/>
    <param name="proxy" value="****inboundurl"/>
    <param name="register-proxy" value="****inboundurl"/>
  </gateway>
</include>

  

Keeping Connections Alive

You can use the following parameter in your configuration to force FreeSWITCH to re-register with your provider at certain intervals. This may be helpful for NAT issues by keeping the connection state open through your internal firewall.

    <param name="expire-seconds" value="60"/>

  

You can also set FreeSWITCH to ping your gateway at intervals.

    <param name="ping" value="30" /> 

  

See Also

<!-- NewPP limit report Preprocessor node count: 33/1000000 Post-expand include size: 854/2097152 bytes Template argument size: 699/2097152 bytes Expensive parser function count: 0/100 --><!-- Saved in parser cache with key wiki:pcache:idhash:1952-0!1!0!!en!2!edit=0 and timestamp 20101127015348 -->

SIP Provider Examples